1201 Series Bobbin Winders - Medium to Fine Winding Applications

Characteristics
Technical specifications
Accessories
View enlarged image

1200 Spare parts
1201 Spare parts
Miscellaneous Spare parts
  The 1201 Series is our extremely popular bench top bobbin winder, well suited for medium to fine wire winding applications, and has an electronic counter with either a 7 mm ( 1/4") or 1/2" arbor, a DC motor, and foot rheostat pedal to control the start and speed of the winder.
   It is well suited for medium to fine wire winding applications. Comprised of an electronic counter, DC Motor and a foot rheostat pedal to control the start and speed of the winder. There are four models to select from depending on your speed and wire size requirements.

CHARACTERISTICS

1. Easy to operate.
2. Bright LED readout to the nearest 1/10 of a turn.
3. Ninety-nine presets, absolute or additive.
4. Count to 99,999.9.
5. Programs stored in internal, non-volatile memory.
6. Dynamic braking.
7. Triac motor speed circuitry for precision winding control.
8. RS-232 computer interface capability.
9. Exceptionally rugged and reliable

back to top

 

TECHNICAL SPECIFICATIONS
Pre-sets
 Up to ninety-nine different pre-sets can be defined to determine stopping points within the winding operation. Each pre-set can be set as either absolute or additive in defining the number of turns.
Directional Control
 The arbor rotation can be programmed either as top-coming or top-going with either a negative or positive count. Arbor direction is switch selectable.
General:
  Motor type DC Motor, Triac type motor speed circuitry
  Braking Dynamic
  Speed Control Multi-range electronic foot control
  Presets 99 user defined
  Counter Range 0 to 99,999.9
  Security Operator lookout code
  Dimensions L x W x H = 10” x 12” x 10” 24lbs
  Arbor Size 1/2 inch for 1201-2, -3AX, -3AR 7mm for 1201-1
  Power 117V, 48-63 Hz, Approximately 100 VA
 

 Model

Arbor
Dia

Speed Chart (rpm)

 Torque

AWG
Limit

 Range
1

 Range
2

 Range
3

Range
4 

1201-1 7 mm 0-450 0-1100 0-2800 0-5000 12 in-oz #26
1201-2 0.5 in 0-300 0-800 0-2000 0-3600 50 in-oz #20
1201-3AX 0.5 in 0-200 0-400 0-660 0-1000 8 in-lb #17
1201-3AR 0.5 in 0-100 0-200 0-330 0-500 16 in-lb #14
1201-3A 0.5 in 0-50 0-100 0-165 0-250 25 in-lb #12
1201-3 0.5 in 0-30 0-60 0-100 0-150 40 in-lb #10
1201-4 0.5 in 0-300 0-800 0-2000 0-3600 12 in-lb #16

back to top


1201 Bobbin Winder Accessories


1215 Chuck Adapter

 A standard Jacobs Chuck which mounts on the arbor of the winder, it is used to hold winding mandrels.

1242 Head Stock

 Mounting on the arbor of the winder, it is used in conjunction with the 1230 Tailstock to drive quick release mandrels.


1230 Tailstock

 Provides additional support for large wire winding applications and multiple bobbin mandrels.


1217 Baseplate

 A mounting base used to mount the 1201 Bobbin Winder, 1230 Tailstock and 1250 Automatic Traverse together on a common platform.
1217-1 model : Mounting base (26" x 12")
Aluminum (Notes: Tail stock not included, sold separately)
1217-3 model : Mounting base (33" x 12")
Aluminum (Notes: Tail stock not included, sold separately)


1231 Auto Controller

 An adjustable speed and braking control used in place of the standard foot rheostat pedal.

1220 Custom Mandrel

 For single or multiple bobbins, these can be fabricated by Adams-Maxwell.

back to top

home | site map | contact us | about us
1201 Series | 1400 Series | 1250 ATL | 1260 ATL