1201 Series Bobbin Winders
The 1201 Series is our extremely popular bench top bobbin winder, well suited for medium to fine wire winding applications, and has an electronic counter with either a 7 mm ( 1/4") or 1/2" arbor, a DC motor, and foot rheostat pedal to control the start and speed of the winder.
It is well suited for medium to fine wire winding applications. Comprised of an electronic counter, DC Motor and a foot rheostat pedal to control the start and speed of the winder. There are four models to select from depending on your speed and wire size requirements.

1250 Traverse
The 1250 Automatic Traverse can be interfaced to the 1201 series Bobbin Winders to automatically lay the wire into the work piece by traversing back and forth relative to the wire diameter and speed of the bobbin winder. This eliminates the operator from having to hand lay the wire onto the work piece. The 1250 Automatic Traverse is physically mounted on the 1217 baseplate and located to the right and slightly behind the winder. The wire is tensioned controlled by a dereeler located behind the traverse and fed over the traverse's wire support arm unto the workpiece. The 1250 Automatic Traverse uses a high precision stepper motor with a powerful microprocessor which provides high precision settings and movement controls to provide excellent layering capability. The traverse is easily set up by simply setting the wire diameter (pitch) and the traverse length by thumbwheel switches and establishing the home(s) and starting traverse direction. The number of turns and speed are established by the bobbin winder. It’s that simple. Flexible tooling for wire feeding allows for multiple bobbins to be wound at the same time to increase your production output.

1400 Series Bobbin Winders
The 1400 Series is our heavy duty bobbin winder. It is well suited for heavy winding applications with rugged bearing plates, roller bearings, 3/4 inch arbor and an industrial strength encoder. Comprised of an electronic counter, DC Motor and a foot rheostat pedal to control the start and speed of the winder. There are two models to select from depending on your speed and wire size requirements.

1260 Traverse
The 1260 Automatic Traverse functions the same as the 1250 Automatic Traverse but occupies a larger footprint for heavier winding applications. It is designed to interface with the 1400 Bobbin Winders to automatically lay the wire onto the work piece by traversing back and forth relative to the wire diameter and speed of the Bobbin Winder. This eliminates the operator from having to hand lay the wire onto the work piece. The 1260 Automatic Traverse is physically mounted on the 1417 Baseplate and located to the right and slightly behind the Bobbin Winder. The wire is fed from behind the Traverse, over the Wire Support Arm onto the work piece. The wire tension is controlled by a dereeler.