ADAMS - MAXWELL
Winding Systems

Auto Controller
Replaces the foot rheostat pedal of the bobbin  winder  with an adjustable speed control dial to provide a constant speed.  The deceleration rate can be controlled by adjusting the variable brake dial.

Model #:  1231.2

(click images for larger version)

Tail Stock
The tailstock is used when additional support is required during the winding operation.  Comes with a live center, one stroke action and mounts on the 1217 baseplate.  Made of sturdy cast aluminum.

Model #:  1230

Mounting Baseplate
1/2” thick aluminum mounting base used to mount the 1201 Bobbin Winder, 1230 Tailstock and 1250 Traverse on a common platform.  Measures 33” in length by 12” in depth.

Model #: 1217-3

Wire Guide Assembly
Mounts to either  the carriage assembly or the guide rail assembly  of the 1250 Traverse to guide wire from the dereeler to the work piece. The wire guide assembly comes with a top locator pulley, bottom feed off pulley and a wire grip assembly.

Model #: 1228

Guide Rail Assembly
Mounts to the carriage assembly of the 1250 Traverse to support up to four wire guide assemblies for multi-bobbin winding applications.

Model #: 1243-1 (7 inches)

Model #: 1243-2  (9 1/2 inches)

Wire Tube Assembly
Replaces the bottom feed-off pulley of the wire guide assembly for precision winding applications.   Comes with one wire tube which must be specified. Additional tubes may be purchased separately.

Model #: 1240
Tubes:
A (awg 20 - 26)    B (awg 26 - 38)    C (awg 22– 34)
D (awg 28 - 48)    E (awg 16 - 20)    F (awg 44 - 60)

Memory Module
This memory  module plugs into the back of the bobbin winder  where a winding program can be stored, removed and then recalled at a future date.
Note: Bobbin winder must have Option P.

Model #: 1239