ADAMS - MAXWELL
Winding Systems

Auto Controller
Replaces the foot rheostat pedal of the bobbin  winder  with an adjustable speed control dial to provide a constant speed.  The deceleration rate can be controlled by adjusting the variable brake dial.

Model #:  1431-2

(click images for larger version)

Mounting Baseplate With Tailstock
3/4” thick aluminum mounting base used to mount the 1400 series bobbin winder, 1430 Tailstock and 1260 Automatic Traverse.  The tail stock comes with a live center, one stroke action and is made of sturdy cast aluminum.
 (Note that the 1417-1  is not wide enough to mount the 1260 Traverse.)

Model #:  1417-1
Size:  46” x 18"

Model #: 1417-2
Size:   58”  x  28” (Shown)

Wire Guide Assembly
Mounts to either  the carriage assembly or the guide rail assembly  of the 1260 Traverse to guide wire from the dereeler to the work piece. The wire guide assembly comes with a top locator pulley, bottom feed off pulley and a wire grip assembly.

Model #: 1428

Guide Rail Assembly
Mounts to the carriage assembly of the 1260 Traverse to support up to four wire guide assemblies for multi-bobbin winding applications.

(1428 Wire Guide Assemblies not included)

Model #: 1443

Memory Module
This memory  module plugs into the back of the bobbin winder  where a winding program can be stored, removed and then recalled at a future date.

Model #: 1239