ADAMS - MAXWELL
Winding Systems

1400 Series Bobbin Winders
The 1400 Series is our heavy duty bobbin winder.  It is well suited for  heavy winding applications with rugged bearing plates, roller bearings, 3/4 inch arbor and an industrial strength encoder.  Comprised  of an electronic counter,   DC Motor and a foot rheostat pedal to control the start and speed of the winder.  Each machine is equipped with dynamic breaking for precise winding control, multi-range electronic foot speed control, bright LED readout to nearest 1/10 of a turn. The arbor rotation can be programmed either as top-coming or top-going with either a negative or positive count.  Arbor direction is switch selectable. There are two models  to select  from  depending on your speed and wire size requirements. 

Pre-sets
Up to ninety-nine different pre-sets can be defined to determine stopping points within the winding operation. Each pre-set can be set as either absolute or additive in defining the number of turns.  A series of pre-sets can be sequenced together to form a group which can be identified and individually accessed. 

Option P
Adds an interface which allows for the use of the 1239 Memory Modules which are removable plug-in memory modules used to store winding pre-sets for quick setups. 

Appx 1/4 Hp DC Motor, Triac type motor speed circuitry
Dynamic
Mulit-Range electronic foot control
99 user defined
0 to 99,999.9
Operator lookout code
L x W x H = 15" x 20" x 15"   60lbs
3/4 inch,  includes flat and keyway
117V,  48-63 Hz,  Approximately 400 VA