ADAMS - MAXWELL
Winding Systems
|
|
ADAMS - MAXWELL |
|
|
 |
|
|||
 |
||||
 |
Bench Top Winders |
|||
 |
|
|||
 |
 |
1201 Series Bobbin Winders The 1201 Series is our extremely popular bench top bobbin winder, well suited for medium to fine wire winding applications, and has an electronic counter with either a 7 mm (1/4") or 1/2" arbor, a DC motor, and a foot rheostat pedal to control the start and speed of the winder. It is well suited for medium to fine wire winding applications. 1250 Traverse 1250 Automatic Traverse can be interfaced to the 1201 series Bobbin Winders to automatically lay the wire into the work piece by traversing back and forth relative to the wire diameter and speed of the bobbin winder. This eliminates the operator from having to hand lay the wire onto the work piece. Accessories There are various accessories to enhance the capabilities of the 1201 Series Bobbin Winder and the 1250 Traverse. |
||
 |
||||
 |
||||
 |
||||
 |
||||
 |
||||
|
Heavy Duty Winders |
||||
|
|
||||
 |
1400 Series Bobbin Winders The 1400 Series is our heavy duty winder. It is well suited for heavy winding applications with rugged bearing plates, roller bearings, 3/4 inch arbor and an industrial strength encoder. Comprised of an electronic counter, CD Motor and a foot rheostat pedal to control the start and speed of the winder. 1260 Traverse The 1260 Automatic Traverse Automatic Traverse functions the same as the 1250 Automatic Traverse but occupies a larger footprint for heavier winding applications. It is designed to interface with the 1400 Bobbin Winders to automatically lay the wire onto the work piece by traversing back and forth relative to the wire diameter and speed of the Bobbin Winder. This eliminates the operator from having to hand lay the wire onto the work piece. Accessories There are various accessories to enhance the capabilities of the 1400 Series Bobbin Winder and 1260 Traverse. |
|||
|
Tensioning Devices |
||||
|
|
||||
 |
Dereelers/Tensioners Dereelers (tensioners) are used to provide tension on the wire dureing the winding process. A spool of wire is placed on the base of the dereeler and the wire feeds through a series of spring tensioning rings and pulleys. A variety of dereelers are available according tot he range of wire size and spool diameter. |
|||
|
|
||||
